Oki MC860 MFP, User Manual

Page: 161 / 178

Troubleshooting > 161
Error Check Data
Program Data Receive Error
<%DLCODE%>
An error has occurred while your machine’s
network card firmware is being
reprogrammed.
%DLCODE%
1. File size error.
2. Check-sum error.
3. Invalid printer model number
4. Invalid module I/F version
5. Invalid FAT version
Error Wait a Moment
Program Data Writing Your machine’s network card firmware is
being reprogrammed.
Error Power Off/On
Program Data Written OK Your machine's network card firmware has
been reprogrammed successfully.
Error Check Data
Program Data Write Error
<%DLCODE%>
An error has occurred while your machine’s
network card firmware is being
reprogrammed.
%DLCODE%
1. Memory allocation error
2. Download file error
3. Device allocation error
4. No device space
5. File writing failure
6. CU-F/W mismatch
Error Shutdown screen
&
Initializing screen Controller unit is rebooting.
%CODE%:
0 … Reboot due to a reason other than the
following.
1 … Reboot due to PJLCommand.
2 … Reboot in accordance with a menu
change.
3 … Reboot due to quit operator of PostScript
Language.
4 … reboot by Network Utility (including
Web).
Error Shutdown in progress Your machine is shutting down.
Error Please turn off the Power. Shutdown complete.
Error Lamp Error. Please call service. Indicates that a lamp error error has
occured.
If the code still appears, contact your dealer.
Error Carriage Error Indicates that a mirror carriage error has
occured.
If the code still appears, contact your dealer.
Error USB Memory Full
Press <Stop> key Indicates that file saving has failed due to
insufficient free space in the USB memory.
Error Writing Failed
Press <Stop> key Indicates that file saving has failed; file is
write-protected.
Error USB Memory disconnected
Press <Stop> key Indicates that the USB memory was
extracted and file saving has stopped.
STATUS /
CODE MESSAGE MEANING / ACTION