Oki MC362w Maintenance Manual Download Page 189

Page: 189 / 314

44952001TH Rev.2

6-6

Oki Data CONFIDENTIAL

6. REGULAR MAINTENANCE

6.4 Cleaning the Paper Feed Roller

If there appear vertical lines on the printing side, please clean the pick-up roller.

Note!

In order not to cause damage to the surface of roller, please use soft cloths to

clean it.

Cleaning paper Feed Rollers and pad

Note!

The following images use tray 1 as an example, but the same procedure

applies to tray 2.

(1) Pull out the paper cassette.

(2) Wipe the paper feed rollers inside the machine with a soft cloth lightly moistened

with water.

(3) Wipe the paper feed roller on the paper cassette.

(4) Push the paper cassette back into the tray.

Feed roller

Summary of Contents for MC362w



























































































































































































































































































































Search results

Summary of Contents for MC362w

Reviews:

Related manuals for MC362w

Brands by name

Popular brands

Oki MC362w, Maintenance Manual

Search results

Summary of Contents for MC362w

Reviews:

Related manuals for MC362w

Brands by name

Popular brands