Oki MC362w Maintenance Manual Download Page 188

Page: 188 / 314

44952001TH Rev.2

6-5

Oki Data CONFIDENTIAL

6. REGULAR MAINTENANCE

Cleaning LED head

If there appear line breaks or white lines, or the letters and characters are blurred, please
clean LED head.

(1) Switch off the power supply.

(2) Lift the scanner.

(3) Press OPEN button and open the top cover.

Caution

Personal injuries may occur.

The fuser unit is extremely hot. Do not touch it.

(4) Lightly wipe the lens (4 points) of the LED head with soft tissues.

Note!

Do not use solvents as methyl alcohol or thinner, as they might cause damage

to the LED head.

(5) Close the top cover.

(6) Lower the scanner.

LED head

Top cover open button

Summary of Contents for MC362w



























































































































































































































































































































Search results

Summary of Contents for MC362w

Reviews:

Related manuals for MC362w

Brands by name

Popular brands

Oki MC362w, Maintenance Manual

Search results

Summary of Contents for MC362w

Reviews:

Related manuals for MC362w

Brands by name

Popular brands