Oki MB770dn, User Manual

Page: 15 / 336

PRINTING FROM WINDOWS
- 15 -
2
1
3
4
5
6
7

[Basic] tab
The [Basic] tab contains basic print operation settings, such as
the original paper size, print paper size, paper source, paper
type, destination, number of copies, orientation, and so on.
1) Original Paper Size
This selects the size of a document to be printed.
Note
• There are also 40 custom paper sizes in the [Original
Paper Size] box. You can set the custom paper sizes in
the [Others] tab.
 P.24 "[Others] tab"
• The default paper size will be [Letter] or [A4] according
to the regional setting in the Windows.
2) Print Paper Size
Select this to enlarge or reduce a page image to fit exactly
in the selected paper size. If you do not wish to enable
enlarge or reduce printing, select [Same as Original Size].
Note
• When you use the custom paper size, you need to select
manually the custom paper size in a tray in advance.
Memo
• There are also 40 custom paper sizes in the [Print Paper
Size] box. You can set the custom paper sizes in the
[Others] tab.
3) Image Scale
Select this check box to enter the scale manually to enlarge
or reduce an image. The ratio can be set at between 25
and 400%.
Memo
• For detailed instructions on how to print with the [Image
Scale] setting, see the following page:
 P.39 "Fitting images within paper size"
4) Paper Source
This selects a paper source to print a job in the most
suitable paper size. The figure on the right indicates the
paper size set for each paper source. When you select a
paper source, the chosen one is indicated with a green
square in the figure.
Memo
• Youj can select a paper source by directly clicking on the
figure on the right.
- Auto — Automatically selects the paper set in this
equipment according to the printed document size.
- Tray 1 — Paper is fed from the 1st Tray.
- Tray 2 — Paper is fed from the 2nd Tray.
- Tray 3 — Paper is fed from the 3rd Tray.
- Tray 4 — Paper is fed from the 4th Tray.
- LCF ― Paper is fed from the large capacity feeder
(LCF).
- MPT — Paper is fed from the multi-purpose tray (MPT).
When this is selected and print a job, [JOB STATUS] on
the touch panel will blink. Press [JOB STATUS] and
check the paper size of the job. Then set the paper and
press the [START] button to print a job.
Note
• The selectable values vary depending on the optional
devices installed in this equipment and their
configuration on the [Device Settings] tab.
• When paper such as special that needs to be fed from
the multi-purpose tray is set, [MPT] may be
automatically selected in the [Paper Source] box, and
then a confirmation dialog box may appear.
• When the paper size settings on the [Device Settings]
tab differ from those in the equipment, the paper source
setting is ignored and the equipment may prompt to set
the paper in the multi-purpose tray.
5) Paper Type
This sets the media type of the paper.
- Plain (Thin) — Select this when printing on plain thin
paper.
- Plain — Select this when printing on plain paper.
- Thick1 — Select this when printing on thick 1 paper.
Available original paper sizes are listed below:
• A4 (210 x 297 mm)
• A5 (148 x 210 mm)
• B5 (182 x 257 mm)
• Folio (210 x 330 mm)
• A6 (105 x 148 mm)
• Postcard
(100 x 148 mm)
• Return Postcard
(148 x 200 mm)
• Letter (8 1/2 x 11")
• Legal (8 1/2 x 14")
• Statement
(5 1/2 x 8 1/2")
• 13"LG (8 1/2 x 13")
• 8.5"SQ (8 1/2 x 8 1/2")
• 16K (195 x 270 mm)
• 13.5"LG (8 1/2 x 13.5")
• IndexCard (3 x 5")
• Executive
(7 1/4 x 10 1/2")
• Envelope Com10
(4 1/8 x 9 1/2")
• Envelope Com9
(3 7/8 x 8 7/8")
• Envelope Monarch
(3 7/8 x 7 1/2")
• Envelope DL
(110 x 220 mm)
• Envelope Cho-3
(120 x 235 mm)
• Envelope Cho-4
(90 x 205 mm)
• Envelope You-4
(105 x 235 mm)
• Envelope C5
(162 x 229mm)
1
2
3
5
4
6
7
8