Oki LP441b, Manual Rapide

Page: 37 / 152

37
Note: You can check the current setting with the test printout (see
page 21) . When terminating the online command designation,
confirm that the STATUS LED lights green and then turn the
printer power off .
DIP Switch
Setting DIP switch
➊
Turn the printer power off .
➋
Open the DIP switch cover .
➌
Change the position
of the switch you want
to change using a
pointed tool such as
the tip of ball-point
pen .
Reference
13
53
Reference
13
52
DIP Switch
Setting DIP switch
1
Turn the printer power off.
2
Open the DIP switch cover.
3
Change the position of
the switch you want to
change using a pointed
tool such as the tip of
ball-point pen.
2
3
4
4
D
1
Online Command Setting Mode
Online Command Designation
1
2
Petit lapin compatible command designation
DSW-1, 2, 3, 4 = (ON, ON, ON, ON) + Cover open + PRINT key + POWER
SBPL command designation
DSW-1, 2, 3, 4 = (ON, ON, ON, ON) + Cover open + FEED key+ POWER
Setting in process
(STATUS LED blinks green.
)
Setting complete
(STATUS LED lights green.)
Type
Petit lapin compatible
command designation
SBPL command
designation
Operation
Uses online command as Petit
lapin standard command.
Uses online command as SBPL
command.
Default
SBPL command
designation
Online command designation change
Change of online command designation is available with the designation of
DSW and key at the printer power on. The setting is valid after turning the
printer off.
Note: You can check the current setting with the test printout (see Page
30). When terminating the online command designation, confirm
that the STATUS LED lights green and then turn the printer power
off.