Oki ES9160 MFP, Manual

Page: 12 / 182

1 BEFORE USING EQUIPMENT
10 BASIC Menu for the Copier Function
Equipment status indication area
The equipment status indication area shows the following information:
1. Receiving tray indication (  P.37)
This shows the tray to which copied paper exits.
2. [EXIT TRAY] button (  P.37)
This is for switching receiving (exit) trays.
3. Drawer buttons (  P.55)
These show the size of paper, amount of paper remaining in each drawer and the paper type set for the drawer. When
you want to use a particular drawer, press the corresponding button.
The amount of paper remaining in each drawer is displayed as follows. Use it as a rough guide since the detection
of the remaining paper may vary depending on the paper type.
* Approx. 100 sheets of plain paper recommended by OKI
4. [BYPASS FEED] button (  P.38)
When this button is pressed with paper set in the bypass tray, it will be selected as the paper source.
5. Paper type on the bypass tray (

P.38)
This shows the type of paper placed on the bypass tray with an icon.
Remaining paper Display
Approx. more than 10 mm (0.40")
*
1 sheet - approx. less than 10 mm
(0.40")
*
No paper
2
1
3
5
4