Oki ES8462 User Manual Download Page 163

Page: 163 / 183

Troubleshooting > 163

Warning

<%COLOR%>

Toner Regional Mismatch Incorrect toner cartridge fitted.

Replace with genuine toner cartrighe

Warning

Non Genuine

<%COLOR%>

Toner

Incorrect toner cartridge fitted.

Warning

Error Postscript

An error has been detected:

The job has a grammatical error.

The page is complicated, and VM was used

up.

Warning

<%COLOR%>

Image Drum Near Life

Indicates image drum is near the end of it’s

life. Order replacement image drum(s).

Warning

Fuser Unit Near Life

Indicates fuser is near the end of it’s life.

Order replacement fuser.

Warning

Belt Unit Near Life

Indicates transfer belt is near the end of it’s

life. Order replacement transfer belt.

Warning

Please Change Fuser Unit

Notifies the life of the fuser. This is a warning

only.

Warning

Please Change Belt Unit

Notifies the life of the belt. This is a warning

only.

Warning

<%COLOR%>

Toner Low

Indicates Toner quantity is low.

Warning

Please Install

<%COLOR%>

Toner

This warning appears when the cover is

opened and closed or when machine Power is

switched OFF/ON after a waste-toner full

error occurs.

Warning

<%COLOR%>

Toner Empty

Toner empty.
Warning status takes effect at Cover Open/

Close. Allows printing approx. 50 pages (A4

5% duty, density 5%).

Warning

<%COLOR%>

Toner Not Installed

Notifies that the toner cartridge is not

installed.

Warning

Please Install New

<%COLOR%>

Image

Drum

Notifies the life of the drum. This is a

warning only.
This warning appears when the cover is

opened and closed just after the drum life

error occurred.

Warning

<%TRAY%>

Missing

Indicates paper tray(s) are not installed.

Warning

<%TRAY%>

Empty

Tray empty. Treated as a warning until

printing from that particular tray is required.

Warning

File System is Write Protected

An attempt to write in a read-only file.
This is a temporary warning, it remains until

the end of the job then disappears.

Warning

Memory Overflow
Memory Overflow

Memory overflow occurred in the collate

print.

Warning

Memory Overflow
Press <Stop> key

Memory overflow occurred during PC fax job

receiving.
Press the Stop button to return to the default

screen.

STATUS /

CODE

MESSAGE

MEANING / ACTION

Summary of Contents for ES8462
























































































































































































Search results

Summary of Contents for ES8462

Reviews:

Related manuals for ES8462

Brands by name

Popular brands

Oki ES8462, User Manual

Search results

Summary of Contents for ES8462

Reviews:

Related manuals for ES8462

Brands by name

Popular brands