Operation > 117
Creating:
To register a short cut:
1.
Press the
Job Program
button on the control panel to prompt the
Job Programs
screen.
2.
Select a job number you wish to associate to your program.
3.
Select
Yes
to continue, or
No
to exit without saving.
4.
Key in the steps you wish to program; for example if you wish to program a copy job
that is double-sided, A4(SEF) scan size and the output is 20 copies:
(a) Press the
Copy
button on the control panel.
(b) Press the
Others
button on-screen.
(c)
Press the
DuplexCopy
button on-screen.
(d) Press the
1->2 sides
button on-screen.
(e) Press the
Enter
button on-screen.
(f)
Press the
Scan Size
button on-screen.
(g) Press the
A4(SEF)
button on-screen.
(h) Press the
Enter
button on-screen.
(i)
Press the
Close
button on-screen.
(j)
Using the numerical keypad, type in
20
.
5.
Press the
Job Programs
button on the control panel.
6.
Using the on-screen keypad type in an appropriate title for the program.
7.
Press the
Enter
button on-screen to complete the registration.
Using:
To use a pre-programmed short cut:
1.
Press the
Job Program
button on the control panel to prompt the
Job Programs
screen.
2.
Select the job number you wish to use.
3.
At the prompt, select
Yes
to execute the program or
No
to exit.
Deleting:
To delete a Job Program function:
1.
Press the
Setup
button on the control panel to prompt the
Setup
screen.
2.
Press the
Job Programs Setting
button.
NOTE
Maximum of 60 steps per program; selecting or pressing a button counts as
one step.
It is a good idea to write down the steps to be performed beforehand as every
keystroke/button press is programmed.
NOTE
You cannot edit the steps within a program, if you wish to change them then
you must reprogram the job number.
