Oki ES8140 User Manual Download

Page: 35 / 83

Interfaces > 35

NTERFACES

Your printer is equipped with a selection of data interfaces:

Parallel

– For direct connection to a PC. This port requires a bi-directional (IEEE

1284 compliant) parallel cable.

USB

– For connection to a PC running Windows 2000 or later or Mac OS X or later.

This port requires a cable conforming to USB version 2.0 or above.
The operation of a printer is not assured if a USB compatible device is connected

concurrently with other USB-compatible machines.
When connecting multiple printers of the same type, they appear as *****, *****

(2), ***** (3), etc. These numbers depend on the order of connecting or turning on

each printer.

LAN

– For network cable connection.

If you are connecting your printer directly to a stand alone computer proceed to

“Printer

drivers” on page 36

If your printer is to be installed as a network printer, please refer to the Network Guide for

further details on how to configure the network connection before installing the printer

drivers.

1. If the centronics (parallel) port is enabled, the product is no longer Energy Star compliant.

NOTE

It is not recommended that you connect serial/USB and parallel cables to
the printer simultaneously.

Interface cables are not supplied with your printer.

NOTE
Administrator’s authority is required when installing a network connection.

Summary of Contents for ES8140




















































































Search results

Summary of Contents for ES8140

Reviews:

Related manuals for ES8140

Brands by name

Popular brands

Oki ES8140, User Manual

Search results

Summary of Contents for ES8140

Reviews:

Related manuals for ES8140

Brands by name

Popular brands