Oki CX4545 MFP Copying Manual Download Page 66

Page: 66 / 194

3 BASIC COPY MODES

64 Enlargement and Reduction Copying

Place the next original, and then press [NEXT COPY] on the touch panel or the [START]
button on the control panel.

Scanning of the next original starts. If you have more than one original, repeat this step until the scanning of all the
originals is finished.

When the scanning of all the originals is finished, press [JOB FINISH] on the touch
panel.

Copying starts.



Setting photo originals in other sizes

Press [CUSTOM] on the touch panel.

Key in the size of the original.

1) Press [X] on the touch panel and key in its width within 10 to 434 mm (0.39" to 17.09").
2) Press [Y] on the touch panel and key in its length within 10 to 300 mm (0.39" to 11.81").
3) Press [OK] on the touch panel.

Summary of Contents for CX4545 MFP


































































































































































































Search results

Summary of Contents for CX4545 MFP

Reviews:

Related manuals for CX4545 MFP

Brands by name

Popular brands

Oki CX4545 MFP, Copying Manual

Search results

Summary of Contents for CX4545 MFP

Reviews:

Related manuals for CX4545 MFP

Brands by name

Popular brands