Oki CX4545 MFP Copying Manual Download Page 123

Page: 123 / 194

4.EDITING FUNCTIONS

Job Build 121

4 EDITING FUNCTIONS

Press the [START] button on the control panel.

Scanning starts. When the scanning of all the originals is finished, the message below appears.

Place the next stack of originals, and then select the settings.

Repeat steps 4 and 5 until all the desired pages have been scanned.

If you do not change any settings, those for the last job will be applied.

When the scanning of all the originals is finished, change the number of copy sets as
required. Then press [JOB FINISH] on the touch panel.

Copying starts. If any storing function is set, that will also start.

Summary of Contents for CX4545 MFP


































































































































































































Search results

Summary of Contents for CX4545 MFP

Reviews:

Related manuals for CX4545 MFP

Brands by name

Popular brands

Oki CX4545 MFP, Copying Manual

Search results

Summary of Contents for CX4545 MFP

Reviews:

Related manuals for CX4545 MFP

Brands by name

Popular brands