Troubleshooting > 148
11.
Open the rear exit tray (5) and check for a sheet of paper in
the rear path area (6).
Pull out any sheets found in this area.
If the sheet is low down in this area and difficult to remove, it
is probably still gripped by the fuser. In this case raise the top
cover, reach around and press down on the fuser pressure
release lever (7).
12.
If you are not using the rear exit tray, close it once paper
has been removed from this area.
6
5
7
Summary of Contents for CX2033 MFP Plus
Page 1: ......
