9
Consumables
1. OKI Data ink cartridges should be installed before the Install By date printed on the pack. Other non-
genuine ink cartridges may damage the printer. In this case, printer repair fees will be borne by you.
2. To guarantee print quality, expiration dates are indicated for ink cartridges, cleaning liquid cartridge sets,
and storage liquid cartridge sets. Use these consumables before their expiration date.
3. Put used ink cartridges into a plastic bag and dispose of them as industrial waste. Observe local
regulations for disposal of consumables.
4. Unpack the Oki Data ink cartridges only to install them. Do not store Oki Data ink cartridges in direct
sunlight. Store the Oki Data ink cartridges in a cool, dry place. This prevents deterioration of the ink during
storage.
5. Do not disassemble the ink cartridges. They are intended for single use only.
6. Do not drop the ink cartridges. Avoid shock to them. The drop or shock may cause an ink leakage.
Media
Supported media
In addition to the media types mentioned in the printer User’s Guide, the following media type is also supported.
Note that print conditions may change depending on environmental conditions and the media production batch.
So you are recommended to test the print with the media beforehand.
For details, contact your service representative.
z
Reflective sheeting from 3M
Precautions when storing media
z
When storing media, packed or unpacked, avoid direct sunlight and humidity. To avoid dust, put the
media into a box or a bag, and keep it in a cool and dark place.
z
Avoid rapid temperature change to prevent condensation.
z
Do not store media upright. A media stored upright may be deformed, move on the roll due to its weight,
or may its edges may be damaged.
z
Do not pile up roll media.
z
Make sure the media rolls are secured when stored. They are heavy and may cause injury if they roll or fall.
Precautions when disposing of media
z
Dispose of media or printout in compliance with all local, state, and federal regulations.
Precautions when using media
z
Do not subject unpacked media to temperature and humidity variations. Before loading the media on
the printer, leave the media in the operating environment for three hours or more. Note that ambient
humidity variations caused by turning on or off the air conditioner may affect the media.
z
The media may curl at low temperature, and wrinkle at high temperature. Keep the temperature around
23°C and the humidity around 50% when you use the media.
z
Do not use parts of the media that are scratched, wrinkled, curled or folded, or with foreign matter on
them. Never use a damaged media, as the right and left edges of the media are especially critical to feed
media on the printer. Also, do not drop the media and avoid water stains, which may degrade the image
quality and cause the printer to malfunction.
z
When handling the media, pay attention not to touch the printing surface with bare hands since
fingerprints may appear after printing.
z
Do not touch the printed part of the media. Always hold the media by the margin. The image quality may
be degraded by human sebum and sweat.
z
If the media is wound in the shape of a cone, correct the winding before loading and using the media.
Summary of Contents for ColorPainter M-64S
Page 54: ...54 Printing on reflective sheeting...
Page 84: ...47260301EE Rev4...
