Oki C9850 MFP, Troubleshooting And Maintenance Manual

Page: 54 / 70

Appendix A – Printer information and error messages > 54
Program Data Received OK Completion of program
data reception. Wait for a while.
Program Data Written OK Completion of program
data writing. Restart printer.
Program Data Receive Error
<nnn> An error occurred during
reception of program data. Check data.
Program Data Receiving The printer is receiving the
program data. Wait for a while.
Program Data Write Error
<nnn> An error occurred during
writing program data. Check data.
Program Data Writing Writing program data is in
process. Wait for a while.
Belt Unit Near Life Life of the belt unit is about
to end. Prepare new belt unit but
unnecessary to change.
Check Belt Unit Belt unit is installed
incorrectly. Re-install the belt unit.
Change Belt Unit Install a new belt unit.
Install New Belt Unit
Belt Unit Life Install a new belt unit.
Belt Unit Life Install a new belt unit.
Error Postscript An error occurred while
printing using a PS driver. Try re-sending the job. If
the problem remains,
contact your dealer.
No Staple Finisher unit is out of
staples. Install staples.
Could Not Staple. No Staple Install staples. Press the
ONLINE button to clear the
error.
MPTray Lift Up Error Paper cannot be fed from
the multi-purpose tray. Place paper into the multi-
purpose tray correctly.
Printing (MPTray) Paper is fed from the multi-
purpose tray and being
printed. –
MPTray Empty Place paper into the multi-
purpose tray.
MPTray Overfilled Too much paper in the
multi-purpose tray. Reduce the amount of
paper.
MPTray Near End Paper on a multi-purpose
tray is about to run out. Prepare specified paper.
Change Paper in MPTray
MEDIA_SIZE MEDIA_TYPE
Press ONLINE Button
Please see HELP for details Paper loaded onto a multi-
purpose tray is different
from the specified one. Press the HELP button and
follow the instructions.
Memory Overflow Lack of memory space. Press the ONLINE button.
Simplify the print data or
increase memory space
(delete unnecessary files).
Print Configuration The printer is printing set-
up value. Wait for a while.
MESSAGE MEANING ACTION