Calibrating the MFP > 47
C
ALIBRATING
THE
MFP
Calibrating the MFP using the KODAK Grey Scale Strip optimises performance. It is
advisable to calibrate your MFP:
>
after changing a toner cartridge or image drum
>
before embarking on any job where print quality is very important
>
after a spot check comparison between original material and the printed copy
indicates that a better match is required
To calibrate the MFP:
Use the and
MENU
buttons on the control panel to scroll through the menus.
1.
Select the
CALIBRATION
menu and press
ENTER
.
2.
Select
CALIBRATE
and press
ENTER
.
3.
Select
COPIER SCREEN
and press
ENTER
.
Alternatively you can choose to calibrate the printer via this menu. For example,
selecting
6 X 6 DOT SCREEN
calibrates the MFP for use as a printer on this setting.
4.
Select
YES
and press
ENTER
to print the ColorCal Measurement Page.
5.
Select
YES
on the
MEASURE PAGE
menu and press
ENTER
.
6.
Position the KODAK Grey Scale Strip over the arrows at the top of the ColorCal
Measurement Page.
