C9600 User’s Guide> 47
T
URNING
O
N
NOTE
If you have used the
Shutdown/Restart
button to reduce the
printer to a state where the LCD panel indicates it can be
turned off or restarted, you can turn it on again by pressing the
Shutdown/Restart
button.
1.
To start the printer after it has been turned off by using
the
Power
switch, set the
Power
switch to On.
C
HANGING
THE
DISPLAY
LANGUAGE
Carry out the following steps to change the language that is
displayed on the LCD display:
1.
Ensure that the LCD panel indicates that the printer is
ready to print.
2.
Enter menu mode by pressing either the
Up-arrow
or
Down-arrow
button and press them repeatedly as
required until Menus is highlighted.
3.
Press the
Enter
button to select Menus.
4.
Press the
Up-arrow
or
Down-arrow
buttons repeatedly
as required until System Adjust is highlighted.
5.
Press the
Enter
button to select System Adjust.
Summary of Contents for C9600n
