SETTING UP YOUR MACHINE > 17
SETTING UP THE ADF (OPTIONAL)
1.
Remove the standard Scancopier document cover (1) by
opening it and lifting upwards to remove the inserts (2) from
the holes at the rear of the Scancopier.
Store the document cover on a flat surface in a safe place.
CAUTION!
In some countries the ADF is an optional accessory. As such, it can be
installed at a later time. If the Scancopier has been used previously, be
sure to switch everything off and disconnect AC power from the
Scancopier before installing the ADF.
2
2
1
