TROUBLESHOOTING > 35
CLEANING THE OPTIONAL ADF
From time to time the pad assembly and feeding rollers may become
contaminated with ink, toner particles or paper dust. In this case the
Scancopier may not feed documents smoothly. If this occurs please
follow the cleaning procedures below to return your machine to its
original state.
1.
Moisten a cotton swab with isopropyl alcohol (95%).
2.
Lift the ADF release button (1).
3.
Open the ADF front cover (2).
4.
Wipe the feeding rollers (3) by moving the swab from side to
side. Rotate the rollers forward with your finger and repeat the
above cleaning procedures until the rollers are clean. Be
careful not to snag or damage the springs (4).
5.
Wipe the pad (5) in the direction from top to bottom. Be careful
not to damage the springs (4).
6.
Close the ADF unit.
The ADF is now ready for use.
2
1
4
3
3
5
