manualshive.com logo in svg

Oki C831n, User Manual, Page: 82 / 150

Share
Download
Oki C831n User Manual Download Page 82

- 82 -

Changing the Equipment Settings

3

3.

 

Changing Printer Settings

Boot Menu

Item

Factory Default

Description

Boot Menu USB Setup

USB

Enable

Sets whether to enable USB I/F. 

Speed

480Mbps

Sets the maximum transfer speed of USB I/F. 

Soft Reset

Disable

Sets whether to enable the Soft Reset 

command.

Offline Receive Disable

Sets whether to enable the function that 

keeps the data receivable state with no 

change of the I/F signal in case an error 

occurs.

Serial Number

Enable

Sets whether to enable the USB serial 

number. 

Security Setup 

(When SD 

Memory Card is 

installed)

Job Limitation

Off

Sets the limited job mode.

When the mode is set to [Encrypted Job], 

printing data other than specified (only an 

encrypted authentication print job can be 

specified) is restricted.

Make Secure 

SD Card

(NULL)

Enables encryption of data saved on an SD 

memory card.

Make Normal 

SD Card

(NULL)

Disables encryption of data saved on an SD 

memory card.

Reset Cipher 

Key

(NULL)

Resets the cipher key used on an encrypted 

SD memory card.

After this operation has been completed, all 

data stored on the SD memory card cannot 

be restored.

Storage Setup

Check File 

System

(NULL)

Resolves mismatch between the actual 

(available) memory and the available memory 

displayed and performs recovery of the 

administration data (FAT information) for 

a file system. This operation is applied to 

each file system. (When SD Memory Card is 

installed)

Check All 

Sectors

(NULL)

Performs recovery of the defective sector 

information on SD memory card and resolves 

mismatch between the actual (available) 

memory and the available memory displayed. 

(When SD Memory Card is installed)

Enable SD Card Yes

If the printer is not able to turn on due to a 

damaged SD memory card, selecting [No] 

enables the printer to turn on as if there is 

no SD memory card installed even if an SD 

memory card is installed to the printer. (When 

SD Memory Card is installed)

Erase SD Card

(NULL)

This item is displayed only when an SD 

memory card is installed.

This function erases all data on the SD 

memory card. (When SD Memory Card is 

installed)

Enable 

Initialization

No

Disables any changes that involve 

initialization of the block device (SD memory 

card, flash memory).

Language Setup

Language 

Initialize

(NULL)

Initializes the message file loaded on the flash 

memory.

Summary of Contents for C831n























































































































































Reviews:

No comments