Oki C831n, User Manual, Page: 100 / 150

- 100 -
Mac OS X Utilities
4
4.
Using Utilit
y Softw
are
„ „
Mac OS X Utilities
This section explains utilities you can use in Mac OS X.
Panel Language Setup
You can change the operator panel display
language.
1
Output a menu map for the printer.
To output settings, press the < ENTER > button,
and select [ Print Setup ]>[ Configuration ].
2
Launch the panel language setup utility.
Reference
● “Installing Utilities” P.86
3
Select a method of connection.
When selecting [ TCP/IP ], enter an IP address.
You can check the IP address on the menu map
output in step 1.
4
Click [ OK ].
5
For the menu map “Language Format”
value, check that the value displayed
on the screen matches the following
conditions.
Condition 1: The first digit of the version
number matches.
Condition 2:
The value displayed on the screen
is the same as or newer (higher)
than the Language Format value.
Memo
● If Condition 1 is not met, an error will be displayed
in the operator panel when downloading. If Condition
1 is not met, an error will be displayed in the control
panel when downloading. In order to restore,
restart the printer. In case that Condition 1 is met
but Condition 2 is not met, though the printer can
be used, some setting names may be displayed in
English.
6
Select a language.
7
Click on [ Download ].
The language setting file will be sent to the
printer, and when sending is complete, a message
will be displayed.
8
Restart the printer.
Network Card Setup
You can use the Network Card Setup to
configure the network.
In order to use Network Card Setup, TCP/IP
needs to be activated.
Note
● Configure the TCP/IP settings.
Configuring the IP Address
1
Launch Network Card Setup.
Reference
● “Installing Utilities” P.86
2
Select the printer.
3
Select [ IP Address... ] from the
[ Printer ] menu.
4
Configure the settings if necessary and
click [ Save ].
5
Enter the password and click on [ OK ].
- The default password is the last 6
alphanumerical digits of the Mac address.
- The password is case sensitive.
6
Click on [ OK ] to activate the new
settings.
Restart the printer network card.