Oki 62433101 User Manual Download Page 131

Page: 131 / 137

Appendix A - Moving and transporting > 131

PPENDIX

A - M

OVING

AND

TRANSPORTING

OVING

YOUR

MFP

Turn off the MFP and disconnect or remove the following:

Power cord

Printer cable

Paper in the paper cassette

Move the MFP to the new location.

RANSPORTING

YOUR

MFP

Turn off the MFP and disconnect or remove the following:

Power cord

Printer cable

Paper in the paper cassette

Lift the scanner.

NOTE
Lock the scanner before moving the MFP.

WARNING!

This product is heavy; a minimum of two people are required to lift

it safely.

NOTE
Be sure to unlock the scanner before turning on the MFP.

WARNING!

Your MFP is a precision machine and can be damaged during

transportation if packaged incorrectly.

NOTE

If your machine is equipped with the additional paper tray remove it
before transporting.

Lock the scanner before transporting the MFP.

Summary of Contents for 62433101










































































































































Search results

Summary of Contents for 62433101

Reviews:

Related manuals for 62433101

Brands by name

Popular brands

Oki 62433101, User Manual

Search results

Summary of Contents for 62433101

Reviews:

Related manuals for 62433101

Brands by name

Popular brands