Faxing(MB470/MB480) > 71
TAD interface
Telephone Answering Device Mode (TAD): Use this mode if you want the machine and
telephone answering machine to share the same phone line. Like Telephone/fax mode, the
TAD mode detects whether an incoming call is fax or voice call. Refer to
for more information.
To set up TAD mode:
1.
Using the Down arrow key, scroll to
Menu
and press Enter.
2.
Using the Down arrow key, scroll to
Admin Setup
and press Enter.
3.
Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight
Done
and press Enter.
4.
Using the Down arrow key, scroll to
Fax Setup
and press Enter.
5.
Using the Down arrow key, scroll to
Basic Setup
and press Enter.
6.
Using the Down arrow key, scroll to
TAD Mode
and press Enter.
7.
Select the appropriate setting;
Type1, Type2, Type3
.
8.
Press the Left arrow key to exit the menu.
Refer to
for details on enabling TAD mode.
DRD interface
Distinctive Ring Detection Mode (DRD): This mode is programmed for the fax to answer
only on a distinctive ring. You can have a single phone line to have two numbers with
distinct rings, one for regular phone calls and one for fax. If the phone line is in use, and
there is an incoming fax, the sender will receive a busy signal.
To set up DRD mode:
1.
Using the Down arrow key, scroll to
Menu
and press Enter.
2.
Using the Down arrow key, scroll to
Admin Setup
and press Enter.
3.
Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight
Done
and press Enter.
4.
Using the Down arrow key, scroll to
Fax Setup
and press Enter.
5.
Using the Down arrow key, scroll to
Basic Setup
and press Enter.
6.
Using the Down arrow key, scroll to
DRD Type
and press Enter.
7.
Select the appropriate setting;
Type1, Type2, Type3, Type4
.
8.
Press the Left arrow key to exit the menu.
Refer to
for details on enabling DRD mode.
Remote receiving
If you have an external telephone handset connected to your fax machine, you can instruct
your fax machine to begin receiving by entering a three-digit code on your telephone
keypad. This feature is useful when you answer a call on the external phone, but need to
switch the line over to your fax machine.
1.
Using the Down arrow key, scroll to
Menu
and press Enter.
2.
Using the Down arrow key, scroll to
Admin Setup
and press Enter.
3.
Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight
Done
and press Enter.
4.
Using the Down arrow key, scroll to
Fax Setup
and press Enter.
Summary of Contents for 62433101
Page 1: ...MB400 Series MB460 MB470 MB480...
Page 29: ...Getting started 29 6 Replace the tray in the MFP...
Page 137: ......
