Copying > 63
a. N-up can only be changed from 1in1 if paper size is set to A4 or Letter and documents are scanned
from the ADF. Collate always defaults to “Off”. Reduce/Enlarge to “100%”. Reduce/enlarge to
“100%,” Edge erase to “0mm (0.00in)” and Margin shift -Right/Bottom to “0mm (0.00in)”.
b. The setting displayed, mm or inch, depends on the setting in Admin Setup - System Setup - Unit of
Measure in Menu Mode. If Edge Erase is set to other than “0 mm” or “0.00 in,” Reduce/Enlarge always
defaults to “100%”, N-up to “1in1”, and Margin Shift - Right/Bottom to “0 mm (0.00 in)”.
c. Any parts of the image that do not fit on the paper as a result of this setting, are not printed. The
setting displayed mm or inch, depends on the setting in Admin Setup - System Setup - Unit of
Measure in Menu Mode. If Edge Erase is set to other than “0 mm” or “0.00 in,” Reduce/Enlarge always
defaults to “100%”, N-up to “1in1”, and Margin Shift - Right/Bottom to “0 mm (0.00 in)”.
d. Any parts of the image that do not fit on the paper as a result of this setting, are not printed. The
setting displayed mm or inch, depends on the setting in Admin Setup - System Setup - Unit of
Measure in Menu Mode. If Edge Erase is set to other than “0 mm” or “0.00 in,” Reduce/Enlarge always
defaults to “100%”, N-up to “1in1”, and Margin Shift - Right/Bottom to “0 mm (0.00 in)”.
4.
Press the Left arrow key to return to the start menu.
Id Card Copy
On, Off
MENU ITEM
OPTIONS
Summary of Contents for 62433101
Page 1: ...MB400 Series MB460 MB470 MB480...
Page 29: ...Getting started 29 6 Replace the tray in the MFP...
Page 137: ......
