Ojmar OTS ADVANCE, User Manual

Page: 25 / 96

1_OTS LOCKS OJMAR 25
1.7 DESCRIPTION OF FLASHING LEDS
The OTS lock includes an LED on the knob. This LED lights up whenever an action is
performed on it.
The colour codes are indicated in the following table:
GREEN
LED
RED LED YELLOW
LED
DURATION DURATION
(TIME)
DESCRIPTION
1 flash Very short 100 ms Key reading error.
1 flash Long 1 sec Communications
error.
1 flash Long 1 sec Key checksum
error.
1 flash Long 1 sec Set-up key used up.
1 flash Long 1 sec Incorrect key in
unused lock.
1 flash Long 1 sec Incorrect
installation no.
1 flash Long 1 sec Incorrect key in
dedicated or free
lock.
2 flashes Medium 400 ms Error on using or
releasing free key.
2 flashes Medium (400
ms=2/5s)
400 ms Key not correctly
recorded when
initialising with
keys.
10 flashes Short (200
ms=1/5s)
200 ms The key is
cancelled.
1 flash Short (200
ms)
Every 2
seconds
Occupied lock
warning
3 flashes
(First)
3 flashes Medium (400
ms=2/5s)
400 ms EEPROM
deprogramming at
the start of a cycle.
3 flashes 3 flashes
(First)
Very Short
(100
ms=1/10s)
100 ms Mechanical error.
3 flashes Medium (400
ms=2/5s)
400 ms Low battery
detection. Replace