OCS SOFTWARE
OJMAR
2
2. OCS SYSTEM: ELEMENTS
OCS is an electronic locking system mainly designed for sports and leisure centres. This system is basically made up of OCS
keypad locks, a device for its programming and maintenance called programming key and management software.
The OCS lock is an electronic lock that includes a capacitive touch keypad for the user to insert a numeric code.
This locking system replaces the traditional mechanical key lock and even the transponder lock. The lock is a safety device with
four, five or six digit configurable numeric codes.
The system is autonomous and 4 non-rechargeable alkaline batteries power the lock.
3. OPERATING DESCRIPTION
3.1 OCS
The OCS lock can be configured with five different operating modes: free, free with coin, free with key, fixed with latch and fixed
without latch.
The following sections describe the special features of each of these operating modes. Bear in mind that any OCS can be
configured in any of the five ways, but that they have physical differences (tabs and mechanical parts), which makes certain
operating modes incompatible with the different locks.
3.1.1 OCS free mode
The OCS lock in free mode operates with sequence of any digits entered by the user when occupying the lock.
Free OCS are normally open. The user will enter any code to close them. Once occupied by the user, the OCS will only open if the
same code is entered again, and will then open and become free so that another user can occupy it with a code of their choice.
The procedure is the same for closing and opening and consists of the following steps:
1.
Press “start” to wake the lock up.
2.
If the lock is open
à
Enter any numeric code (4, 5 or 6 digits, this is defined during the initialisation of the lock).
3.
If the lock is closed
à
Enter the code entered previously in the locking process.
4.
Click
5.
The lock closes and if we are in situation 2a and it gets occupied. The lock opens and if we are in situation 2b and is
released.
3.1.2. OCS automatic locking fixed mode
The OCS lock operating in fixed mode will open entering a preset numeric code, preset by the facility's staff. This lock only opens
with the combination of numbers assigned to each lock.
Fixed with latch OCS are always closed, and the following steps should be used to open them:
1.
Press “start” to wake the lock up.
2.
Enter the assigned code into the keypad.
3.
Press
4.
The lock opens and after a few seconds automatically closes.
