OCS SOFTWARE
OJMAR
1
1. INTRODUCTION
1.1 GENERAL NOTIFICATIONS
To ensure the correct operation of our product in your facilities you must follow the following rules:
WARNING: Product installation and use must be carried out in accordance with the technical operating conditions described in the
corresponding manual.
WARNING: When not specifically indicated the proper installation and use of the application is the responsibility of the customer.
WARNING: Inspect the packaging and material for damage immediately after reception of the material. Also check that the delivery
is complete (accessories, documentation, etc.).
WARNING: If the packaging has been damaged during transport or you suspect that it could have been damaged or may be faulty,
the material must not be started up. In this case, please contact us.
WARNING: Our products' installation and handling must be carried out by authorised staff. The electrical connections in particular
must be carried out only by qualified specialists.
WARNING: Any replacement or removal of the protection covers is strictly forbidden.
WARNING: Do not attempt to repair materials after a fault or damage and try to operate it again. In such an event, it is essential
you contact us.
WARNING: We take no responsibility for damage caused as the result of misuse.
WARNING: In accordance with Royal Decree 106/2008, dated 1 February 2016, before leaving the devices in their pick-up
installations, the batteries must be removed and left separately for the proper management.
1.2 TECHNICAL SUPPORT
Should you wish to make any enquiries on our products, please contact the Ojmar technical department:
Telephone:
+34 943 748 484
Fax:
+34 943 748 490
Website:
www.ojmar.com
