Ojmar Nexo NLX1, Instruction Manual

Page: 45 / 188

3_PUESTA EN MARCHA
OJMAR 45
5. Jack connection.
NFC reader: Allows communication between the programmer and the lock. To
do this, put the reader of the programmer in front of the symbol on the front part
as shown in the picture below.
6. Characteristics:
MAIN
CHARACTERISTICS
Operation in autonomous mode or with SW
Autonomous
mode
Write user cards/Read all kinds of Classic
Mifare OTS cards 1k/4k (4B or 7B) and
technogym
Mode of use
with SW
Write /Read all kinds of Classic Mifare OTS
cards 1k/4k (4B or 7B) and Technogym
Load the desired configuration in the lock
Update the configuration in the lock
Synchronisation with the time of the PC
Upgrade Firmware of the lock via NFC
TECHNICAL
SPECIFICATIONS
Power Supply USB rechargeable batteries (5,000 mAh)
Charge via the mains: Use battery charger 5v
-1A
Operating
temperature
range
-10º to +50º (non-condensing)
Approx. weight 380g
APPROXIMATE
DIMENSIONS
Outer (length x
width x height)
202 x 89 x 39 mm
3.2.1.1 Main Screen
The main screen of the Ojmar NFC programmer displays the following information: