Oilon VSi 6-14, Installation And Operation Manual

Page: 7 / 74

1.2 Transportation
During lifting, do not walk or work under the heat pump or any other
suspended load.
Transport the heat pump in an upright position.
● If the heat pump needs to be tilted to pass through a doorway, do not tilt the unit
beyond 45°.
● If the heat pump needs to be tilted beyond 45°, detach the compressor unit.
Use a pallet jack or similar machine to transfer the heat pump. Lift the unit from the
bottom.
1.3 Product description
VSi and VMi ground source heat pumps are especially suited for use as the primary
source of heating for new and renovated residential buildings and holiday homes
as well as for apartment-specific heating in semi-detached and terraced houses. To
ensure trouble-free operation, each heat pump undergoes configuration, testing, and a
test run at the factory. The heat pumps feature a built-in storage tank.
Type plate
The heat pump’s type plate is located behind the heat pump’s white cover panel. The
unit’s serial code is marked on the type plate.
This product is CE-marked.
M8011 2204EN 5 (70)