－
36
－
Cause
Corrective Measure
◎
Foreign matter is caught under or around the rail support plate.
Vibration will be weakened if foreign objects are caught between the
vibrating part and the non-vibrating fixed part.
Please remove the trapped foreign matter.
◎ ・
The scraper is in contact with the wall.
・
The rear clearance cover is in contact with the rail or scraper.
If the vibrating part and the non-vibrating fixed part are in contact,
vibration will be weakened.
・
Correct the assembling position.
Please set the clearancebetween the scraper
and the wall to about 0.4 mm.
If the scraper is deformed, replacement is
necessary.
・
Please leave clearance of about 0.4 mm for
the rear clearance cover.
㻼㼍㼓㼑㻌㻞㻛㻠
Rail support plate
Foreign matter is
caught
䐢
Foreign matter (dropped screw etc.) is
in the space between the rail support
plate and the motor.
Vibration will be weakened if foreign objects
are caught between the vibrating part and
the non-vibrating fixed part.
Please remove the trapped foreign
matter.
䐣
Foreign matter is caught under or
around the rail support plate.
Vibration will be weakened if foreign objects
are caught between the vibrating part and
the non-vibrating fixed part.
Please remove the trapped foreign
matter.
Rail support
Clearance
㻼㼍㼓㼑㻌㻟㻛㻠
䐤䞉
The scraper is in contact with the wall.
䞉
The rear clearance cover is in contact
with the rail or scraper.
If the vibrating part and the non-vibrating
fixed part are in contact, vibration will be
weakened.
䞉
Correct the assembling position.
Please set the clearance between the
scraper and the wall to about 0.4 mm.
If the scraper is deformed, replacement
is necessary.
䞉
Please leave clearance of about 0.4
mm for the rear clearance cover.
Scraper
Scraper
Rear clearance
Clearance
䐥䞉
Passing plate is in contact with rail.
If the passing plate is in contact with the rail,
vibration will be weakened.
䞉
Adjust the position of the passing
plate.
Passing
plate
contact
㽢
Summary of Contents for OM-26R Series
Page 43: ...42...
