－
22
－
Hexagon socket
head screw M2.6X10
７－６．
Replacing the driving belt
Turn OFF the power switch before starting replacement and
adjustment.
Driving belt
Insert a screwdriver
between the belt and
pulley and pry it off.
Driving pulley
Magnetic pulley
Driving belt
If the driving belt is worn, cut or slips while in use, replace it with a
new one.
・
Turn the power OFF and remove all covers.
・
Remove the driving belt from the pulley by using a screwdriver to
pry it off.
・
When you mount the new belt, start with the driving pulley then the
magnetic pulley.
・
For assembly, reverse the disassembling procedure.
・
After assembly, check that the screws are scooped normally.
[CAUTION]
The driving belt has very strong tension.
Be careful not to pinch your fingers!
The driving belt part number is T
EK8101
1
Summary of Contents for OM-26R Series
Page 43: ...42...
