OHAUS Ranger R41ME6-M, Instruction Manual

Page: 34 / 41

Ranger
™ 4000 Series EN 32
Command Function
F
x “text”
Enter Footer line, where x = line number 1 to 2
, “text” = rear text up to 24
alphanumeric characters.
\EscR
Global reset to reset all menu settings to the original factory defaults
(Escape key + ‘R’ Key)
SNS x
Switch to Platform x; 1 = Main Platform, 2 = 2nd Platform. (Only available
when 2nd Platform is connected)
MT-SICS Commands
Command Function
LEVEL 0 @ Reset the scale
I0 Inquiry of all available SICS
commands
I1 Inquiry of SICS level and SICS
versions
I2 Inquiry of scale data
I3 Inquiry of scale software version
I4 Inquiry of serial number
S Send stable weight value
SI Send weight value immediately
SIR Send weight value repeatedly
Z Zero the scale
ZI Zero immediately
LEVEL 1 D Write text into display
DW Weight display
SR Send and repeat stable weight value
T Tare
TA Tare value
TAC Clear tare
TI Tare immediately
7.3.2 Connections for RS232
The 9-
pin female subminiature “D” connector COM1, is provided for interfacing to other devices.
The pin connections are as follows:
Active pins: PIN 2 = TXD, PIN 3 = RXD, PIN 5 = Ground
Figure 7-2. RS232 Pins