EXPLORER BALANCES
EN-97
4.16
Statistics
Statistics are used to compare a number of samples and examine the relative deviation of the samples along with
other statistical data. A minimum of three samples is required.
Statistics can operate
manually
(key press after each step) or
automatically
(weights automatically recorded
when stable). To use the statistics feature, enable it in the Application Setup menu.
This feature is available in the application modes marked with
√
in the table below.
Application Mode
Statistics Function
Basic Weighing
√
Parts Counting
√
Percent Weighing
√
Check Weighing
√
Dynamic / Animal
Weighing
√
Filling
√
Totalization
N/A
Formulation
N/A
Differential Weighing
N/A
Density Determination
N/A
Peak Hold
N/A
Ingredient Costing
N/A
Pipette Adjustment
N/A
SQC
N/A
Fill Weight Variation
N/A
4.17
Secondary Unit
Secondary unit allows the display of the weighing result in a second unit. After enable it in each application's setup
menu, touch the displayed second unit on the screen while weighing to change it.
This feature is available in the application modes marked with
√
in the table below.
Application Mode
Secondary Unit
Basic Weighing
√
Parts Counting
√
Percent Weighing
√
Check Weighing
√
Dynamic / Animal
Weighing
N/A
Filling
√
Totalization
N/A
Formulation
√
Differential Weighing
N/A
Density Determination
N/A
Peak Hold
√
Ingredient Costing
N/A
Pipette Adjustment
N/A
SQC
N/A
Fill Weight Variation
√
