EN-6
EXPLORER BALANCES
1.3
Safety Precautions
Definition of Signal Warnings and Symbols
Safety notes are marked with signal words and warning symbols. These show safety issues and warnings. Ignoring
the safety notes may lead to personal injury, damage to the instrument, malfunctions and false results.
WARNING
For a hazardous situation with medium risk, possibly resulting in severe injuries or death if not
avoided.
CAUTION
For a hazardous situation with low risk, resulting in damage to the device or the property or in loss
of data, or minor or medium injuries if not avoided.
ATTENTION For important information about the product. May lead to equipment damage if not avoided.
NOTE
For useful information about the product.
Warning Symbols
General hazard
Explosion hazard
Electrical shock
hazard
Safety Notes
CAUTION:
Read all safety warnings before installing, making connections, or servicing this equipment.
Failure to comply with these warnings could result in personal injury and/or property damage. Retain all
instructions for future reference.
Before connecting power, verify that the AC adapter's input voltage range and plug type are
compatible with the local AC mains power supply.
Do not position the equipment such that it is difficult to reach the power connection.
Make sure that the power cord does not pose a potential obstacle or tripping hazard.
When shipping or transporting this product, follow the applicable regulations for equipment
containing lithium-ion batteries.
Operate the equipment only under ambient conditions specified in these instructions.
This equipment is for indoor use only.
Do not operate the equipment in wet, hazardous or unstable environments.
Do not allow liquids to enter the equipment.
Do not load the equipment above its rated capacity.
Do not drop loads on the platform.
Do not place the equipment upside down on the platform.
Use only approved accessories and peripherals.
Disconnect the equipment from the power supply when cleaning.
Service should only be performed by authorized personnel.
WARNING:
Never work in an environment subject to explosion hazards! The housing of the instrument is
not gas tight. (Explosion hazard due to spark formation, corrosion caused by the ingress of gases).
CAUTION:
Battery is to be replaced only by an authorized Ohaus service dealer. Risk of explosion can
occur if the rechargeable battery is replaced with the wrong type or if it is not properly connected. Dispose of
the rechargeable battery according to local laws and regulations.
Safety precautions for the Ionizer:
WARNING: ELECTRICAL SHOCK HAZARD
AVOID TOUCHING THE ELECTRODE PINS WHILE THE IONIZER IS TURNED ON.
1.4
Intended User
This instrument is intended for use in laboratories, pharmacies, schools, businesses and light industry. It must only
be used for measuring the parameters described in these operating instructions. Any other type of use and
operation beyond the limits of technical specifications, without written consent from OHAUS, is considered as not
intended. This instrument complies with current industry standards and the recognized safety regulations; however,
it can constitute a hazard in use. If the instrument is not used according to these operating instructions, the
intended protection provided by the instrument may be impaired.
