Effective 07/2014
37
Operating Instructions
Start-up
Once the system has been installed in accordance with the set-up and installation
instructions, it may be operated. The following steps should provide some direction.
Please keep in mind that this system produces medical-grade oxygen conforming to
the standards of USP (United States Pharmacopeia XXII oxygen 93% Monograph)
however, the system is not intended to be used as a medical device.
Connect the oxygen outlet to the application.
After connecting it to an electrical outlet and pushing the switch on the machine to the
ON
position, wait for
2
minutes for the unit to come up to maximum purity.
The oxygen delivery pressure should be set to
12 psi (0.83 bar)
for
OG-15
and
20 psi (1.4 bar)
for
OG-20
.
Open the flow meter to the desired level of flow as indicated by the ball float inside the
flow meter.
Begin using the oxygen.
Shut-down
To temporarily stop the flow of oxygen from the unit; simply close the valve on the flow
meter by turning the knob at the base, clockwise to zero (0).
To shut off the machine, push the
ON/OFF
power switch to the
OFF
position. The light should
go out on the switch and the compressor noise should quickly die out.
Summary of Contents for OG-15
Page 2: ...Page left intentionally blank...
Page 45: ...Effective 07 2014 Appendix...
Page 46: ...Page left intentionally blank...
Page 48: ...Page left intentionally blank...