28
ofs.com
imagine a place®
800.521.5381
Assembly instructions
Obeya assembly instructions
Connector nut
Connector bolt
Connector bolt
Beam access slot
5/16-18 x 3/4" Bolt &
5/16 flat washer
Framed wall panel attachment
Multi panel full wall
Note:
Panel to panel connection.
Wood infill to wood infill: 2.75" connector
bolt & connector nut
Wood infill to metal infill: 3" all-thread &
2 connector nuts
Metal infill to metal infill: 3.5" all thread &
2 connector nuts.
1. Place a framed panel assembly that will attach to a post into position ensuring the correct
orientation so that the framed panel assembly is centered in the width of the post edge and the
mounting holes in the frame align with the insert nuts in the edge of the post.
Note
: Make sure the
light sill engages into the groove in the side of the vertical frame rail on the framed panel. The side
of the framed panel with the mounting holes will face the inside of the space. On walls using T and
4 way posts where both sides are inside the space the posts are machined to accept the panels in
either orientation and can be mounted as desired.
2. Secure the framed panel assembly to the wall structure with (2) 5/16-18 x 3/4" hex head bolts
and (2) 5/16 flat washers through the access slots in the side of the beam extrusion and threading
them into the insert nuts in the mounting rail of the framed panel. Leave the bolts loose for panel
adjustments.
Note:
Extrusion edges are sharp!!!
Panel to post
connection
Panel to panel
connection
