27
ofs.com
imagine a place®
800.521.5381
Assembly instructions
Obeya assembly instructions
4. Place the next panel in place and repeat step 2
5. Slide the second panel tight against the first panel and secure using the panel to panel connection
method noted below. Tightening the fasteners to close any gap between the two vertical frame
rails of both panels.
6. Extend the adjustable glides out so that they are snug against the floor. Use the glide extension
cups for each increment over 1/2" of adjustment needed.
7. Go back and tighten the 5/16-18 x 3/4" bolts in the mounting rails of both panels.
Note:
Panel to panel connection.
Wood infill to wood infill: 2.75" connector bolt & connector nut
Wood infill to metal infill: 3" all-thread & 2 connector nuts
Metal infill to metal infill: 3.5" all thread & 2 connector nuts.
Framed wall panel attachment - continued
Multi panel partial wall
Connector nut
Connector bolt
Beam access slot
5/16-18 x 3/4" bolt &
5/16 flat washer
Connector
bolt
Panel to post
connection
Panel to panel
connection
