OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
6
Software
Turn the PC on and start the software by clicking the Swell Meter icon on the
desktop. The first time you start the software, you will be asked to select a
hardware configuation. If your Swell Meter was manufactured before June
2018, choose “Swell Meter”. If it was manufactured in June 2018 or later,
choose “Swell Meter V2”. If you are not sure, look at the cable connecting
the computer to the Swell Meter. If it is a flat, wide ribbon cable, select “Swell
Meter”. If it is a standard USB cable, select “Swell Meter V2”.
The Main Screen will appear:
The checkboxes at the bottom, right-hand corner of the graph control which
information (for all cells) is available to display on the graph. Once a test is
started, you can show or hide the swell percentage, temperature, or corrected
distance for all cells. For example, unchecking the “Temp” checkbox will
remove all temperature lines from the graph.
Legend
