OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
10
Software
Starting a Test
Perform the following steps for each channel to be tested:
1. Zero the channel. Refer to page 8 for instructions.
2. Remove the transfer stand from the cup.
3. Place a screen on both sides of the compacted wafer and insert it into the
wafer tube with the transfer stand on top of it.
4. Place the LVDT spindle on top of the transfer stand.
5. Click the “Zero/Start/Stop” button.
6. Check the “Start” box next to each cell to be tested. To stop a test that is
currently running, check the “Stop” box.
7. Click the “Apply” button to start testing in the selected channels.
8. Immediately add the test fluid to the cup through the hole in the cap.
Wafer
Screen
