OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
5
3. Connect the transducer cables to the LVDTs and then plug them into the
Swell Meter box.
4. Plug the magnetic stirrers into the electrical receptacles located on the
back of the unit.
These cables can be run under the Swell Meter box for a neater
appearance.
5. Insert the thermocouples into the cup assemblies and plug them into the
front of the Swell Meter box.
6. Ensure that the “POWER” switches (located on the back of the Swell
Meter) are in the “OFF” position and make the necessary electrical
connections in accordance to local codes. Ensure that the unit is
grounded.
7. Make sure the computer is securely mounted to the back of the monitor.
8. Connect all the necessary cables to the appropriate ports.
The computer connects to the Swell Meter via the supplied USB cable.
Make sure the Bluetooth receiver is plugged in so that the keyboard and
mouse can connect.
If the computer runs out of disk space, it will no longer be able to store
more test data. If this happens, move older test data to a network or flash
drive to free up additional space.
USB Cable (To Swell Meter)
Bluetooth Receiver
