3.6
“Add”
Function
Addition can be performed by pressing the “ADD” button until its indicator is lit up. In this
case, removing the counted bills from the stacker will not clear the counted number on the
display screen, and the counted number of the next bills will be added to the preceding one.
To clear the counted number, press the “CLEAR” button.
If the machine stops with an error message displayed during the adding calculation, remove
the cause of the error. Remove the bills in the stacker and inside the feeding rolls, if any.
Then, the machine will restart counting with “ 0 ”, which is displayed on the screen by
pressing the “RESTART” button. If restart is not pressed, the machine will not resume its
normal operations.
3.7 “Batch”
Function
The preset function will be selected automatically by setting any optional number between 1
and 999 on the Batch Display; the optional number can be set by pressing the “
+
” button, the
“
-
” button, or the “Batch” button. Every time the “Batch” button is pressed, one of the
specified indications (10, 20, 25, 50, 100, Ø), will be indicated on the green batch display.
Having loaded the hopper with bills, the machine will start counting and will stop when the
counted number reaches the preset number (Batch Counting).
To repeat the batch counting under the same preset number, the next counting operation
can be started automatically by removing the preceding bills from the stacker.
1-800-543-5454
OfficeZone
