5.1 Avoiding Problems
Pre-select the bills you are going to count in the machine. Do not drop into the machine:
Bills with metal clips
Broken bills
Bills with plastic transparent tape
Washed bills
5.2 Jamming
Before you start operating the machine make sure there are no foreign elements in any of
the mechanisms of the machine, such as silica bags, spare parts, etc.
To avoid jamming make sure you put the slanted wad correctly in the hopper. The bill facing
you (in front) will go in first.
The top of the stacker (#14) goes under the metal frame (# 15). The plastic cover should
never be on top of the stacker (it will cause the machine to jam.) If the plastic cover is not in
place, press gently until it fits its predetermined cavity.
If jamming occurs make sure to turn off the machine. Remove carefully with a wood or
rubber stick any bills inside the system. Look for any foreign material like paper clips, etc.
Remove them, if any.
Check the position of the plastic stacker cover (#14). It should go under metal frame (#15).
1-800-543-5454
OfficeZone
