10
6.2 Turning on the main burner
To light the main burner, turn the knob to the left to position "max" (large flame), or directly to the position "minimum"
(small flame). Between these two positions you can choose the caloric flow rate desired for cooking.
6.3 Shutdown
To turn off the main burner, turn the knob to the right position "
"; will stay on only the pilot light. If you continue to turn
the knob to the position "
" even the pilot light will go off.
“6 UNICO” SERIES - TURNING ON AND OFF
6.4 Lighting the main burner (Fig. 7)
Press the knob "G" and turn to the left. Simultaneously press the "H" of the burner ignition. Once turned on the burner
continue to hold the knob other 10/20 seconds to allow the thermocouple to heat up. The flame can be seen from the hole
indicator that is located on the front panel. If the flame goes out during or after the release of the knob, repeat the
operation. Turn the knob to the desired temperature.
H
G
Fig. 8
6.5 Turning out the main burner
Turn the knob to the
“0” position (Fig. 8).
7. MAINTENANCE
We recommend signing a maintenance contract at last once a year.
Clean the cooking plate after use with an emery cloth. After cleaning a thin layer of cooking oil has to be applied to the
plate surface in order to preserve it better.
The parts in stainless steel have to be cleaned gently, using warm water. If you use soap or detergent, make sure that
they do not contain abrasive products and that they are recommended for cleaning stainless steel.
If the appliance is not used for a certain period of time, close the gas supply cock. In the case of a fault in the appliance or
malfunctioning close the main gas inlet cock and call the technical service centre.
All repairs and fault remedying must be carried out by a skilled installer.
1
2 PILOT
2
3
4
4 MIN
3 MAX
1 OFF
Fig. 7
