OERTLI PK 550, Installation And Service Manual

Page: 11 / 32

11
18/03/2016 - 300020192-02 PK 550
4. Installation
4 Installation
4.1 Choice of the location
4.1.1 Positioning of the appliance
For the assembly and because of their design, PK 550 boilers require
no special base. Their closed furnace system means that the floor
need not have refractory properties. All you have to ensure is that the
floor can support the weight of the boiler when it is fitted for operation.
If the boiler location is not determined precisely, leave enough space
around the boiler to facilitate monitoring and maintenance
operations.
Boiler body *
Straight connection (not supplied) *
* 1) In order to facilitate subsequent work on the boiler(replacing the
water distributing tube etc.) use a flanged connection from the boiler
to the system, making sure you comply with minimum clearance
dimension
D .
Angled connection (not supplied)
Air inlet
Air outlet
If A = 1.2 m (door opening side), A’ = 0.5 m
If A = 0.5 m, A’ = 1.2 m (door opening side): adapt the dimensions
on the basis of the dimensions of the burner when the door is open.
B = 1.5 m : adapt the dimensions on the basis of the dimensions of
the burner.
D000923
Boiler
PK
550-9
PK
550-10
PK
550-11
PK
550-12
PK
550-13
PK
550-14
PK
550-15
PK
550-16
PK
550-17
PK
550-18
PK
550-19
PK
550-20
PK
550-21
PK
550-22
PK
550-23
PK
550-24
PK
550-25
L 1555 1645 1755 1845 1955 2105 2245 2355 2445 2555 2645 2845 2955 3045 3155 3245 3355
M 319 243 297 221 275 259 324 269 321 265 299 269 324 269 324 249 303
C min. 300 300 300 300 300 300 436 436 656 656 656 936 936 936 1266 1266 1266
D min. - - - - - - 136 136 356 356 356 636 636 636 966 966 966