CONTINUED »
ODYSSEY7 - BOTTOM
There are seven connector ports on the bottom side of the Odyssey7 (left to right)
PWR on
Power input socket to Odyssey7 (see Getting started – power). Just in front of the pwr On port is a
button, which is a Force power On/Off control. Hold button five seconds to force power off. This is
only to be used if standard power on or off procedures fail (see Getting started – initializing).
SDI in
BNC connector for 3G-SDI input
LTC io
BNC connector for linear Timecode input/output
HDMI in
HDMI 1.4 input from HDMI video source.
HDMI Out
HDMI 1.4 output to external monitor or other device
SDI Out
BNC connector for 3G-SDI output
AUDIO in
3.5mm mini-phone stereo socket for analog audio in.
This input will be enabled in a free future firmware update.
AUDIO Out
3.5mm mini-phone stereo headphone socket.
ODYSSEY7 - TOP
There is a single Solid State Drive (SSD) slot on the top of the Odyssey7
Only Convergent Design 256GB, 512GB and 1TB Odyssey SSDs can be used to capture video on the
Odyssey7. The Odyssey Utility Drive can be used for firmware updates and other future functions, but
not to record video files.
To mount SSD, insert connector-end first with the label facing forward and the handle near flush with the
back of the Odyssey7. Push gently but firmly until the handle flange is flush with the top of the Odyssey7.
It is a snug fit, but the SSD should insert smoothly.
ANATOMY
9
