DigiMatic User Guide
WWW.ODIXION.COM
4/29
1
1
C
C
A
A
U
U
T
T
I
I
O
O
N
N
S
S
For optimum performance, you should use a 100 Mbps Ethernet connection.
Never insert more than 50 CD/DVD in the “stack in”. It will damage the CD/DVD picker.
Use only printable CD / DVD if you want to print the label on the disks. For better printing
quality, use “ODIXION Photo Label” media.
Do not touch the print head nozzles or electrical contacts.
For safety reasons, store ink cartridges out of the reach of small children.
Do not drop or shake ink cartridges.
Never use a power supply voltage other than that supplied in the country of purchase. Using the
incorrect voltage could cause a fire or electric shock. The correct power supply voltages and
frequencies is : AC 230V ±10%, 50Hz.
If you need to transport the DigiMatic, you must use the original package to avoid any damage.
Do not open the printer access door while the DigiMatic is printing
Ensure that the stack in is under the access door before placing new CD/DVD.
Avoid shocks and remove the discs before moving the unit.
Do not spill liquid of any kind, and do not place objects on this unit.
Never place foreign objects in any of the disc stacks.
Avoid dusty, humid, poorly ventilated locations.
Avoid places with extreme changes in temperature or in direct sunlight. The temperature must be
less than 30°C in the room.
Avoid places where ventilation holes would be blocked.
Avoid locations likely to cause vibration or shock.
Do not cut off the power while the unit is operating.
When you insert a new batch of blank CDs or DVDs, check that some of them are not stuck
together. It may happen if the spindle of media has been kept in a wet place.
