ODB DCL800TM, Owner'S Manual

Page: 53 / 145

53
ODB Company
DCL800TM
4.4 Preventative Maintenance
The following are general preventative maintenance procedures for our stan-
dard units. Any special or custom built units may have other preventative
maintenance procedures not directly mentioned in this manual. Please con-
sult ODB before doing any preventative maintenance procedures not specifi -
cally mentioned in this manual.
Proper preventative maintenance of your unit, just like lubrication, correlates
directly to how long your unit will last. A properly maintained unit will last
much longer than a unit that is not maintained properly.
Remove the negative battery terminal before attempting any mainte-
nance procedures.
Thoroughly read and understand the safety and pre-operating sec-
tions of this manual before performing any maintenance procedures.
Preventative Maintenance:
1.
2.
Engine Oil: Change the oil and oil filter according to schedules provid -
ed in your engine's owner's manual (EOM). The engine oil level should
be checked every day. The level should be checked after the engine
has been stopped for a period of time. This will allow the oil to drain
back into the oil pan, allowing a better indication of the true oil level. If
the level is low, see the engines owner's manual for the correct type of
oil.
Engine Coolant: Check the coolant level before starting the unit each
day. The coolant level should not be less than one inch below the top
of the radiator.
NEVER check the engine coolant when the engine is hot. Allow the
engine to cool at least one hour before checking the coolant. Check
the engine owner's manual for instructions. ALWAYS wear eye and
hand protection when working with the radiator.