EX Series Operating Manual
▌Press the cursor keys to change to remote mode
LCD Display
REMOTE
▌In other to apply and store the mode changes, press the limit display key.
LCD Display
SAVED
LCD Display
SAVED
▌When you turn on the power next time, start with your current settings.
≫ Related Remote Interface Command
REM:IPROG {LOC|REM}
REM:IPROG?
REM:IPROG?
Application :
REM:IPROG?
Return Value : "LOC"
REM:IPROG REM
Setting Remote Mode
4-4. Remote Monitoring
Output voltage and current of the power supply can be proportionally Monitoring.
Th f ll
i
i
i
ti
d
i
The following is a pin connection drawing.
Remote Voltage Monitoring
0V ~ 100% output voltage that is proportional to the output voltage from 0V ~ to 5VDC and
you can obtain this voltage from the pin. The following is a pin connection drawing.
< Figure 4-5 Remote Voltage Monitoring >
< Figure. 4-5 Remote Voltage Monitoring >
Remote Current Monitoring
0V ~ 100% output current that is proportional to the output voltage from 0V ~ to 5VDC and
you can obtain this voltage from the pin. The following is a pin connection drawing.
< Figure. 4-6 Remote Current Monitoring >
- 58 -
