EX Series Operating Manual
▌In other to change output control method, press limit display key.
LCD Display
local
▌Press the cursor keys to change to direct.
LCD Display
DIRECT
▌In other to apply and store the mode changes, press the limit display key.
LCD Display
SAVED
▌When you turn on the power next time, start with your current settings.
▌About other mode you can change by same procedure
▌About other mode, you can change by same procedure.
≫ Related Remote Interface Command
REM:OUTP {LOC|CONT|DIR|TTLP|TTLN}
REM:OUTP?
Application :
REM:OUTP?
Return Value : "LOC"
REM:OUTP DIR
Change Direct mode
4-6. Parallel Operating
EX series power supplioes of the SAME Model may be operated with outputs in parallel
to obtain increased load current. You can connect the power supplies up to 5 unit.
P
ll l C
t
Parallel Connector
Following is parallel connectorl and you can find rear panel.
< Figure. 4-11 Parallel Connector >
< Parallel Connector Function Description >
No
1
2
3
Symbol
Control signal output terminal of master power supply
that is choosed master
Master Output
Signal
Functional Description
Slave Input
Selected as the master of the power supply signal line
4
5
6
COM (GND)
p
Signal
p
pp y
g
for connecting to the slave
Internal circuit reference potential terminal
- 61 -
