8 Patient Data Management
16 / 56
Instruction Manual C-Quant ( G/80000/1007/en)
☞
Note
Settings for the selected device are made in the „Devices“ field.
You select the device for which the settings are to be made from the drop-down menu.
Switch the device to active, if it is connected.
“File”
Here, you enter the drive and sub-directory in which the application file is located.
Alternatively the drive and the directory can be searched for by pressing the
but-
ton.
“Transfer-folder”
A directory or folder for storing the patient data is always created locally on your PC
and is used as a „transfer folder“ for transfer of the data to the database.
Here again, the name is always the name of the device followed by the
extension .DAT.
Here, you enter the drive and sub-directory for the “transfer folder”.
Alternatively the drive and the directory can be searched for by pressing the
but-
ton.
Write permisson
Because the settings for all devices can be made from a PC workstation without the
devices actually being connected, you must specify for each PC workstation, whe-
ther the respective device is actually connected or not.
If it is connected, activate the write permission checkbox. The write permission must
be deactivated for all other devices.
