PUREPLACE BUILDING PRO
30
USER MANUAL
Trouble Shooting Guide
Problem/Question
Solution/Answer
What if my OCTO PurePlace
Building Pro won’t turn on?
The indicator lights and OCTO
PurePlace Building Pro letters
are not illuminated and there is
no air flow.
Check to make sure the power adapter is
firmly plugged into the wall outlet and
the OCTO PurePlace Building Pro.
The Lamp Status indicator light
has turned from green to red.
Check to make sure the Green AFLPCO™
Cell is installed properly. If the indicator
light is still red contact an AFL authorized
dealer .
The Lamp Replacement indica-
tor light is blinking
This is an indication that it has been two
years since the Green AFLPCO™ Cell has
been replaced. Contact a AFL autho-
rized dealer to purchase a new Green
AFLPCO™ Cell.
The air flow is diminished, I
can’t feel much air movement.
Check the Dust Guard and verify its
clear of any blockages from dust or other
debris. Follow the directions in the mainte-
nance sec-tion to clean the Dust Guard.
If the above solutions do not fix the symptom please contact your Customer
Service Representative at: www.octotelematics.com
